Posted by Jo Bird on August 31, 2019 at 21:09:01 from (50.48.156.95):
In Reply to: Searching For posted by strogers on August 31, 2019 at 13:50:13:
This maybe of some interest to you it's from a similar post back in 2011.
long green line man
02-09-2011 11:49:41
Re: Front End Loader on 1962 Model 2010 R in reply to Jim Z in MN, 02-08-2011 21:54:48
JD loader part cat.[on JD parts.com] PC 683 or PC 870 shows using, oil outlet cover C14656C on tractor valve; or you could drill & tap your regular cover.. Other option, if tractor is above serial# 29000; valve base has 3/8 plugs for pressure & return oil flow, plumbing from plugs in base may a little harder.. check out PC 689.. as far as I know all 2010's are open center ; unless they were changed over later..
Some claim that you can drill and tap your cover, don't if it actually works or not .. or possibly look for a later valve with the 3/8 plugs.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Memories of an IH Super A When I was ? up to 10, I worked on my Papaw's farm in Greeneville, TN every summer. As I grew older (7), it was the thrill of my day to ride or drive on the tractor. My Papaw had a 1954 IH Super A that he bought to replace a Cub. My Papaw raised "baccer" (tobacco) and corn with the Super A, but the fondest memory was of the sawmill. He owned a small sawmill for sawing "baccer" sticks. The Super A was the powerplant. When I was old enough (7 or 8), I would get up early and be dressed to
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
