Re: JD 4050 with water in oil

Posted by Jon Hagen on December 22, 2001 at 10:53:19 from (63.160.194.202):

In Reply to: JD 4050 with water in oil posted by tom on December 22, 2001 at 10:34:16:

I have a 4450 with the 466 engine with gear drive water pump. JD had a problem with the water pump weep hole getting plugged with dirt and putting antifreeze into the engine. JD sent me a fix kit for this that was just a 3/8 X 3/8 X 1-1/2 chunk of foam rubber that was to be inserted into the weep hole after cleaning the hole with a piece of wire. The foam was to allow coolant to drain while keeping dirt out.
That much coolant leaking sounds more like a bad sleeve O ring. Good luck,hope it is the water pump.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: JD 4050 with water in oil Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]