Re: ot: snowmobile questions

Posted by Ray on December 10, 2001 at 05:57:11 from (198.26.132.99):

In Reply to: ot: snowmobile questions posted by doug vose on December 09, 2001 at 11:19:18:

-On the 440 I would say it is a weak CDI box or possibly sucking air in the carb somewhere, or it could be low on compression. One thing you can do is remove the flywheel and sand the magnets on it to make sure there is no rust on them, If it has rust on them it shortens the air gap between.

-On the 340, does it have points and condensor. If so, the condensor is bad or getting bad. I have soldered in many off the shelf condensors in place of a factory one. You can get a condensor at a auto parts store real cheap. Just solder it in or twist the wires together and attach it anywhere out side the engine. I have used electrical tape to tape it to somewhere on the engine. Email me back if you are still having problems. Hope this helps.
Ray....

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: ot: snowmobile questions Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]