Re: Rusty fuel tank

Posted by Howard on October 10, 2001 at 17:56:26 from (12.27.217.72):

In Reply to: Rusty fuel tank posted by Robert Smith on October 10, 2001 at 16:26:00:

Years ago our local radiator shop used to put gas tanks in the vat and boil them as they did radiators, then to use the torch and solder them they would take a flexible exhaust pipe and fasten it to the tailpipe of another vehicle, and start the motor, and put other end of flexible pipe into the gas tank and let the carbon monoxide go into tank while they used torch, I was told that this was the only way to apply heat to a tank, as the gas or fuel will always remain in the pores of the metal,and the carbon monoxide keeps it from exploding.You might check with your local radiator shops regarding this.Good luck

Follow Ups:

• Re: Re: Rusty fuel tank layne 09:50:23 10/11/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Rusty fuel tank Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]