Re: building a pto hyd pump?

Posted by Franz on September 01, 2001 at 18:30:32 from (209.130.138.221):

In Reply to: building a pto hyd pump? posted by paul on September 01, 2001 at 10:28:08:

As long as you can drive it from the PTO at roughly the same speed it ran on the combine, and set it up so there won't be a lot of vibration & strain introduced to the drive shaft, it should work. Since I have no idea of the gpm it developed on the combine, I can't say if it will be sufficient to your purpose.
A great source of hi volume hyd pumps is retired garbage trucks, those pumps are usually slow speed 550rpm and very high volume.

Follow Ups:

• Re: Re: building a pto hyd pump? Brian G. NY 06:33:04 09/02/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: building a pto hyd pump? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]