Re: Re: Re: Re: JD modle E gas engine
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by john on November 29, 1998 at 20:30:28:
In Reply to: Re: Re: Re: JD modle E gas engine posted by John on November 29, 1998 at 20:22:04:
I Got it to run. I had pulled the igniter wire brushed it and washed it down with brakeclean. I also advanced the timing and and also found that the govener speed was way to fast. The inside timing marks were off and re set them. I still have trouble to get it to start. How far open should the neatle valve be? 1\4 to 1\2. . : : : : : : : : Help. Can not get it to run. Have spark, clean fuel new oil timing marks all in line. Trip on the igniter is right. help : : : JOHN DO U HAVE SPARK AT THE IGNITER POINTS? : : : ARE U GETTING FUEL AT THE MIXER WHEN U CHOKE IT? : : : LET ME KNOW HOW U MAKE OUT : : Check your timing on mag.The two pins on mag should push into the indent on plate when timing mark on flywheel is at spark position. : : I hope this helps. : : Bob
Follow Ups:
Post a Followup
|