Tractor Talk Discussion Board |
Re: Sticking Valves
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob Kerr on August 01, 2001 at 05:51:16 from (205.188.198.181):
In Reply to: Sticking Valves posted by Hand Crank on July 31, 2001 at 19:09:42:
the best way I know off without pulling off the head is to take off the valve cover and rocker shaft and squirt some kerosene mixed with oil onto the valve stem and work it manually until it frees up. DO NOT hit the valve stem sideways! It will break off or bend. Also use a brass hammer or brass rod to tap the valve stems. As far as the fan goes I can't help you there . I have an F-12 and there is no fitting on it either but there is a slotted screw head in the hub that might be a place to put some 160 weight gear oil in. I don't have the lubrication book. Maybe someone can add the info and help both of us out about the fan.
Follow Ups:
Home
| Forums
Today's Featured Article -
Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|