Posted by Bret4207 on September 24, 2018 at 16:50:50 from (64.19.90.196):
Okay, so one of my Case VAC's has a 12 v generator on it, obviously not original. It's a Delco 1102096. Comes back to several mid to late 50's autos. It has never charged so I tore into it. The brushes are pretty worn, but usable. I chucked it up int he lathe and cut the end the brushes ride on ( I forget the correct name for that section) and got the worst of the nicks and gouges out of it. I undercut the mica separations also and cleaned everything up. I tested it (as I know how to do it) and the circuitry appears okay, IOW when you apply power to it, it turns slowly. I cleaned up the voltage regulator that was with it, attached a battery and connected everything up and polarized it. Turning it with a socket and drill it wasn't charging. If I push down on the Batt terminal "points" with the cover off, then it bogs down and acts like it's charging. Put it all back on the tractor and it still doens't charge. I figure at this point it's likely the regulator, but those are pretty expensive these days (last one I bought I paid $75.00!). Was just wondering if I've missed something obvious?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - An Old-Time Tractor Demonstration - by Kim Pratt. Sam was born in rural Kansas in 1926. His dad was a hard-working farmer and the children worked hard everyday to help ends meet. In the rural area he grew up in, the highlight of the week was Saturday when many people took a break from their work to go to town. It was on one such Saturday in the early 1940's when Sam was 16 years old that he ended up in Dennison, Kansas to watch a demonstration of a new tractor being put on by a local dealer. It was an Allis-Chalmers tractor dealership,
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
