Re: Re: Bobcat Skid Loaders
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by wayne on November 22, 1998 at 07:39:36:
In Reply to: Re: Bobcat Skid Loaders posted by DaveM on November 21, 1998 at 06:53:18:
: Your foreman is correct in that hydrostatic pumps are designed to be run at full engine rpm. Scoring the pump and motor comes from either low oil (air in the system) or dirt. Low engine rpm will tend to overheat the oil as well as the engine. You didn't mention the model of the Bobcat, newer ones are less touchy than the old ones were. Most of the problem is in learning the feel of the machine. This is assuming that all the linkages are in good shape, loose joints will cause handling problems. your foreman is incorrect hydrostatic systems can run at any rpm most hydrostatic systems are composed of piston pumps and piston motors and can run at any speed
Follow Ups:
Post a Followup
|