Posted by Deutz Lover on September 11, 2017 at 21:24:19 from (174.218.5.171):
In Reply to: duetz 6006 posted by merla@Byron on September 11, 2017 at 17:55:30:
Deutz D6006 tractors come with two types of pto engagement.
One is a live two stage clutch with the floor mounted lever and engagement/disengagement by pushing the clutch pedal fully to the floor then moving the small lever on the floor forward or back. The clutch pedal is then released to resume operation.
The second type of pto clutch came as an option. This is an independent pto clutch with a small lever on the left floor and a larger lever on the left next to the steering column.
You more than likely have the two stage clutch which was standard. How have you tried to engage it? Sometimes the disc gets stuck and has to be broken loose. If it is stuck I think the gear will grind when you try to throw the floor mounted lever. It can be engaged/disengaged with the engine stopped in order to see if it works. I think you still have to push the clutch pedal to the floor even with the engine stopped. There are certain no-nos to not do to free the pto clutch (don't ask) just explain what you have tried.
The other possibility is that the pto clutch needs adjustment or is slipping so badly it won't turn.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Operator Safety - Loader & Backhoe Operation - by Staff. Loader Operation Do not transport anyone in the loader bucket. Always carry the loader bucket low for maximum stability and visibility, whether the bucket is loaded or empty. Always use the recommended amount of counterweihting to ensure good stability. Be careful when handling large objects such as round bales, logs,
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
