Re: Re: Re: Re: Re: Re: Farmall Super C Value

Subject: Re: Re: Re: Re: Re: Re: Re: Farmall Super C Value

Comments:
: : Thsi last spring I bought a Super C with working hydralics and the quick hitch. It also came with an original International 2 disc disc plow and converted 2 point blade. The tractor runs strong but has a hydraliic leak and electrical short (not impossible problems) and one bad front tire. I paid $1,500.00 and feel it was a fair price. : : : : : : : : : : : : : : : : : : : : : I have found several C's and the prices vary considerably. : : : : : : : What should a Super C with everything working be worth. : : : : : : 1500 + or - : : : : : Truett, It depends on what shape its in, tires,engine, paint, wide front or narrow etc. Some parts of the country are higher than others : : : : Kevin, I am in North Florida and I am looking for one with working Hydraulics, good running motor, wide front, three point hitch. Paint and tires are not too important. What do you think I should be looking at paying and do you know of one that may be available within 300 miles of here? : : : : Thanks, : : : : Truett : : : Truett, The wide front and 3 pt are not common on that tractor, but I guess you could find one with a wide front and add the 3 pt. I dont know of one in your neck of the woods. A super c with wide front anywhere from 1300 to 2300. : : The 3 pnt was not an option. There are after market 3pnts that get : : their lift from arms that go up either side of the operators platform : : and connect to the rockshafts under the fuel tank, but they are not : : very stable and you woln't be pleased in the long run. What you want : : to find is a Super C with the fast hitch (or 2pnt hitch) and then : : order Worksaver's 2pnt to 3pnt conversion for it. That is a much : : more solid setup, only caveat is you have to make sure any implement : : you buy has 26" drawbar spacing. A Super C in decent shape with fast : : hitch is hard to find below about $1800. : : Stan.

Optional Link URL:

Link Title:

Optional Image URL: