Posted by riley101 on May 14, 2017 at 20:43:52 from (75.107.127.13):
I bought it, had the motor rebuilt, put it on, while putting it in gear it grinded horabley like there was no clutch. It drove real slow and only in 1st gear. The next day I changed out the fluids to the equivilant of todays fluids. Started it. Same grinding problem. I drove it 20 foot, dig a hole, went to move it, and got NOTHING. Not having the repair manuel yet I figured it was the clutch. This backhoe has a wet clutch. Broke the tractor down again, took out the converter and hub the attached hub with clutch discs in it. Finally found out how to get them loose and people...I am no expert but they still have the little bumps on the material that makes up the discs. See pics below. But if these discs are ok...the WHAT is the problem? I have no clutch, and I now have no forward and no reverse.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Operator Safety - Loader & Backhoe Operation - by Staff. Loader Operation Do not transport anyone in the loader bucket. Always carry the loader bucket low for maximum stability and visibility, whether the bucket is loaded or empty. Always use the recommended amount of counterweihting to ensure good stability. Be careful when handling large objects such as round bales, logs,
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
