Posted by TimWafer on April 06, 2017 at 07:31:21 from (98.21.118.93):
I have an old BRIGGS L-head engine that's driving me nuts. Its a model 233431 and has the points mounted on the side. Its on an old generator I seldom use.
A couple years ago I put a new coil, points & condenser in it as it had no spark at all. All was well and it ran fine afterwards. Maybe used it once or twice since then and still all was well.
Went to start it a week or so ago and back to no spark. Cleaned the points and new plug, still nothing. Suspected condenser but didn't have one. I did have a couple magnatron coils that don't require points so thought I would convert it over to that. Simple enough I thought. Both coils worked fine on another engine. I can only get a very very weak spark with them on this engine. Not enough to start or run even spinning it fast with a big drill. Magnet in flywheel seems strong. Coil is facing right way. Tried numerous plugs. What am I missing?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Buying your first tractor: The People You Buy From - by Chris Pratt. If you are a first-time buyer, chances are that you are likely to take the word of the seller on things. This is where the problems start... You have reviewed your implement needs and determined the size of machine that will fit the bill and even made a list of the most desirable models. You checked on the availability of a 3-point hitch for the machines on the list and advertised in your local classified paper with so
... [Read Article]
Latest Ad:
1 SD Gibson, 1 D Model needs rear end assembled and installed, 1 D Model needs minor repairs, extra parts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
