Posted by ditchwitch on March 07, 2017 at 07:31:40 from (98.101.210.114):
I ask on Implement Alley and didnt get a good answer so i am going to ask here. Ok i have a Gill Pulverizer and i need to replace all the spikes on. I have found on Agri-Supply 2 different ones. One is 5/8 square 8 inches long for 2.29 a piece the other is 5/8 x 7/8 by 8 inches long called diamond tooth. Now i dont know exactly which one is the one i need for now. But either way i called my local used to be for many many years Massey Ferguson dealer he told me the 5/8 ones is the most popular ones to use but there little over 9.00 a piece and his were hardened. Um so i called Agri supply they lady told me the 5/8 x 5/8 ones was made with 10-45 steel with a hardened tip. the other spike had no info. Thats a big price jump from 2.29 bucks to 9 bucks. My question is which will be the best way to go. Im almost feeling that these are the same or are they.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Field Modifications (Sins of the Farmer) - by Staff. Picture a new Chevrolet driving down the street without it's grill, right fender and trunk lid. Imagine a crude hole made in the hood to accommodate a new taller air cleaner, the fender wells cut away to make way for larger tires, and half of a sliding glass door used to replace the windshield. Top that off with an old set of '36 Ford headlight shells bolted to the hood. Pretty unlikely for a car... but for a tractor, this is pretty normal. It seems that more often than not they a
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.