I have a bigger tractor now with a loader that we use for hay, but still have the first tractor I bought for this farm, a Ford 2000. It is just so darn nimble and flexible it gets used for most jobs around here.
For skidding, I was able to move 20 ft logs easily. I bought a log skidding attachment called a "Log Hog" from Northern tool. If you are handy with a welder I am sure you cold make one. It is basically a 3 point frame with a chain attached. You drop the thing on the ground, run the chain around the end of the log, then lift it a bit off the ground with the 3-point and drive. Works very well.
I also first purchased a 6.5 ft Woods box blade. It is cat 1 but very substantial and heavy. I can barely budge it to move it a bit to line up the lift arms when putting it on the tractor. The little tractor carries it very well and it really takes the work out of leveling ground. I would not ever be without it. Works 10 times better than using a loader to level dirt, in my opinion.
So, I agree with the rest of the folks, just wanted you to know my story. Only thing that could improve this tractor is if it was a 4000. Actually thought about trading it but decided not to.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Farmall M - by Staff. H so that mountable implements were interchaneable. The Farmall M was most popular with large-acreage row-crop farmers. It was powered by either a high-compression gas engine or a distillate version with lower compression. Options included the Lift-All hydraulic system, a belt pulley, PTO, rubber tires, starter, lights and a swinging drawbar. It could be ordered in the high-crop, wide-front or tricycle configurations. The high-crop version was called a Model MV.
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
