Posted by CenTex Farmall on February 25, 2016 at 08:47:06 from (72.107.206.132):
In Reply to: Bearings and belts posted by DeltaRed on February 25, 2016 at 07:06:56:
Shopping around is good. We have a Purvis type bearing store and sometimes the automotive stores can get them as you are saying. We have a family owned farm/welding shop that manages to have most disk and other bearings right on the shelf and reasonably priced.
I stick with one of the name brands: SKF (owns MRC), NTN (owns Bower), Timken, FAG, Koyo, Nachi, or Fafnir.
Country of origin is getting tricky as the big guys are opening plants in China etc. Also there are fake bearings floating around out there, look-a-likes that are marked with a brand name but made with inferior metallurgy. Supposedly SKF is the most faked brand with a lot of Timken fakes as well. They've caught some distributors unknowingly selling fakes. There's plenty of info just a google search away.
The last bearing I bought from the IH dealer was simply a repackaged Bower. IH used to make their own bearings decades ago. All part of the corporate game.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Traction - by Chris Pratt. Our first bout with traction problems came when cultivatin with our Massey-Harris Pony. Up till then, this tractor had been running a corn grinder and pulling a trailer. It had new unfilled rear tires and no wheel weights. The garden was already sprouting when we hooked up the mid-mount shovel cultivators to the Pony. The seed bed was soft enough that the rear end would spin and slowly work its way to the downhill side of the gardens slight incline. From this, we learned our lesson sinc
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
