Posted by Bob on February 01, 2016 at 17:29:55 from (64.255.159.192):
In Reply to: 2014 Expedition Update posted by Gary from Muleshoe on February 01, 2016 at 16:21:35:
I should have though of that, as I have helped two Ford guys out with the same issue on cars.
One had a bug (mosquito) lodged in a small "port" in the MAF, and another had a bunch of dust in it, affecting it's operation.
The one with the bug in it had a broken latch on the airfilter box, and the one with lots of dust was a Lincoln that was always serviced at the dealership.
It had a Motorcraft filter in it that was not sealing due to the plastic airbox being deformed.
I told the guy to take it back to the dealership with service records to prove it had been "serviced" there religiously, and see what they would do to fix it, and what they though about all the dust the engine had eaten. (Ductwork to the throttle body was very dusty inside.)
I never did hear back from him.
Point being, it's not necessarily the air filter itself, but a POOR (CHEAP) design of the air filter box.
(BTW, I seem to remember Ford had an issue with some of the round airfilters/airfilter boxes not sealing and dusting $$$$ engines, and recalled/repaired some. Anyone else remember that?)
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Weldin Basics, Part 3 - by Curtis von Fange. Oxy-acetylene Welding - Part One In our series on welding we have taken a brief look at AC and DC arc welding along with basic techniques and safety equipment required for safe usage. Since our premise is to cover welding types that might best be used on a farm environment we have kept our overview purposefully simple and general. The second type of welding that this observer finds quite useful in
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
