Posted by NCWayne on June 18, 2015 at 18:26:54 from (173.188.169.54):
In Reply to: OEM Filters posted by Fawteen on June 18, 2015 at 17:18:26:
I use typically use wither WIX, or NAPA (made by WIX) filters on everything I own. The majority of my customers do the same. I've got customers that have been with me for over 15 years, with equipment seeing daily, hard use, in a 'production' environment, and have yet to run into any kind of filter related problems on any of their machines. If you take the number of customers/machines, and add the run time up accumulated with no issues, it'll add up to more hours than most on here will ever put on their machines in two lifetimes.
In the end there are good (cheap) filters, and better (more expensive) filters. I say this because no filter mfg is going to knowingly make "junk" and market it to a litigious public. Yes, you can buy a $2 filter and it'll do the job, but it's actual life expectancy might only be 6 months before it needs to be replaced, where the $5 filter might last 2 years. In other words you pretty much get what you pay for.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fasteners: The Nuts and Bolts of Nuts and Bolts - by Curtis Von Fange. The nuts and bolts of nuts and bolts is an interesting and essential piece of knowledge that applies to our older tractors. An improperly torqued capscrew on an engine head or a shear bolt that is too hard on the driving shaft of a bushog can create havoc and make an expensive and uncalled for repair. Let�s examine the purpose and design of these fasteners in order to ensure their proper use. Fasteners are probably one of the aspects of mechanics that is given the least amount of thought.
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
