Posted by 2510Paul on May 24, 2015 at 13:43:32 from (173.202.142.245):
Swather, Haybine, Mower Conditioner, I am assuming these are all the same. I realize Haybine is a New Holland name.
Anyway, it would be real easy for Bryce to find a "Used Up" Swather. Can we give him some things to look for and "watch outs".
1. Is the wobble box in good shape? Maybe someone has a good way to check them. 2. Bryce mentioned driveline and bearings. Yup, good place to look at. 2a. Look for wore out sprockets, bearings, belts, U-joints, gear boxes and seals, etc. 3. Are welds cracked, especially in the area around the wobble box. I fixed one 990 where the wobble box literally "fell off" the machine and laid in the hay. Not only were there welds that came loose but many other welds in that area of the machine were cracked through. 4. Look for cracked welds or structural metal cracks from the tongue on back. The NH 489 had a reputation for this where the tongue attached to the machine. 5. Make sure the machines frame is straight. I have seen bent frames from hitting abrupt dead furrows in the field or obstructions on the edge of the field. The chains and belts did not track, the roller chains would roll off the edge of the sprocket. 6. Check the rivets on the head attachment to the sickle. On my neighbors 990 the sickle head rivets would always loosen up. Finally he just welded them. 7. Check spindle attachments. Are they cracked or show any sign of distortion? I have also seen these "fall off". 8. The NH rubber rollers have a rep. for the rubber coming off the rollers. Check these.
Anyway, that is my list. What can others think of?
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Day Mom Drove the 8N - by Brian Browning. My Dad was wanting to put in a garden but couldn't operate the 8N and handle the old horse drawn plow he had found and rigged up to use with the tractor. Well, he decided to go get Mom out of the house and have her drive the tractor while he walked behind the plow. You got to understand that while my Mom is a hard worker who will always help whenever she can... she had never operated farm machinery before that day. Dad got her out there, explained how the clutch was the same as in our o
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
