Posted by larry@stinescorner on April 18, 2015 at 18:40:47 from (71.187.236.89):
this is a picture of one of the chinese tractors my brother and nephew bought,they bought three of them,one was damaged in the crate and they used some of it for parts,two are running good,diesel, 4wd,new but were sitting in a warehouse for quite some time. Now,,,,,heres what I need help thinking about,,,,my brother had an offer from someone who wants to buy it,,,,he said I could have it for 1500 dollars,he will bring it and the parts tractor to PA,I think he might have offerd because if it stays outside and the parts tractor too,they will deteriorate,and he knows I will keep it inside in PA. I have some pros and cons on the idea,,,,so here goes,,,,,pros,,,,,the tiller I have is a little too narrow for the Ford 2000,even with the back wheels sdjusted all the way in,,,the chinese tractor has a narrow wheel base,a really low 1st gear and a two speed pto..it should be good for the tiller?and I Have a one row 3 pt cultivator,the chinese tractor may be better with that than the Ford? I wouldnt have to plow or do anything to strenuos ,the Ford will keep doing that......Cons,,,,,,,Its Chinese,,,,I have spent plenty fixing up the buildings at the farm last fall,,,,I really dont (need ) another toy? Help me think on it?//,,,,,
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
this is a picture of one of the chinese tractors my brother and nephew bought,they bought three of them,one was damaged in the crate and they used some of it for parts,two are running good,diesel, 4wd,new but were sitting in a warehouse for quite some time. Now,,,,,heres what I need help thinking about,,,,my brother had an offer from someone who wants to buy it,,,,he said I could have it for 1500 dollars,he will bring it and the parts tractor to PA,I think he might have offerd because if it stays outside and the parts tractor too,they will deteriorate,and he knows I will keep it inside in PA. I have some pros and cons on the idea,,,,so here goes,,,,,pros,,,,,the tiller I have is a little too narrow for the Ford 2000,even with the back wheels sdjusted all the way in,,,the chinese tractor has a narrow wheel base,a really low 1st gear and a two speed pto..it should be good for the tiller?and I Have a one row 3 pt cultivator,the chinese tractor may be better with that than the Ford? I wouldnt have to plow or do anything to strenuos ,the Ford will keep doing that......Cons,,,,,,,Its Chinese,,,,I have spent plenty fixing up the buildings at the farm last fall,,,,I really dont (need ) another toy? Help me think on it?//,,,,,