Posted by redtom on March 05, 2015 at 13:12:31 from (97.84.145.28):
I work on a LOT of forklifts at my job and think I've seen it all. I have an early 90's Cat forklift with LP conversion, (Peugot engine, not really a winner in my mind). If you're familiar, these use an Impco Model J convertor coupled directly to the gasoline carb which acts merely as a throttle butterfly and keeps the pneumatic governor action of the existing carb. Its actually quite a clean set up and we have quite a few. This one has a performance issue. Will hesitate and stall or fall flat when accelerated. Pull off the air cleaner hose from air cleaner at the carb and it will rev up! Now, theres not even an element in the filter right now just the empty housing! But, attach that hose and "bog", pull it off and "rev". I've checked ALL the usual. The convertor rebuilt, tune up good, timing good, tank full, and NO vacuum leaks, intake hose clear. What gives?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
