Re: 8n conversion spin on oil filter

Posted by Bob on February 28, 2015 at 19:39:35 from (64.255.159.192):

In Reply to: 8n conversion spin on oil filter posted by koenton on February 28, 2015 at 18:55:48:

I don't think any major filter manufacturer has a complete kit, although WIX (for one) sells a filter head and appropriate spin-on filters with a built-in flow restricter. You will need to fabricate mountings and round up the necessary fittings on your own.

Apparently, there's several independent machine shops that make them.

Ebay is one source.

Whatever way you decide to go, be SURE either the filter or the base has the appropriate flow restricter (as does the original canister filter) that is required to maintain oil pressure and only allow a small flow through the filter, or you will dump to much of the oil pump's flow, resulting in low oil pressure to the bearings.

Replies:

• Re: 8n conversion spin on oil filter Jon Hagen 13:00:13 03/01/15 (0)

Add a Reply! You must be Logged In to Post Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial No List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]