Posted by farmer boy on February 27, 2015 at 16:52:27 from (104.156.66.137):
In Reply to: ot chevy truck id posted by ericlb on February 27, 2015 at 12:26:27:
It does not matter what rear axle it has. The 9.5 SF was used on both the 6 lug and 8 lug 3/4 ton trucks of the time. A 10.5 rear end was optional with the 5.7, standard with the 7.4 and maybe with a 6.5. A 6 lug 3/4 ton GMT400 is 7200lb GVWR(9.5 axle only). An 8 lug GMT400 3/4 ton is 8600lb gvwr.(9.5 and 10.5 available) The 9.5 was available in a 1/2 ton under the RPO code F44. The same truck as a 6-lug 2500 minus a single rear leaf, with a GVWR of 6600lbs.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
