Posted by tractorkrum on January 25, 2015 at 09:57:37 from (216.222.189.57):
I have a 24x24 shop that was built in 1985 that I need to decide to repair or replace. Issues are: When the previous owner built the building it was put on a floating slab, it was built too low and water floods the floor, the concrete has cracked and moved pushing out one of the walls about six inches on the bottom, the overhead door is only seven feet high so on occasion mufflers need to be removed prior to entering the building, both the walk through door and the overhead doors need to be replaced, it needs new shingles, it is on the bottom of a hill, and now the insurance company told me that starting next year they would not insure it unless I repair it. I built a 36x64 pole shed about eight years ago that is filled to the seams. So I have a few options. First would be jack up the building and remove the existing concrete, add about two feet of fill and pour a new slab. Possibly add in-floor heat and add a lean-to. Second would be tear the building down and build a new one. Third would be add onto the pole shed for a new shop area. The problem with this is the location to the driveway and the terrain of the land. Fourth would be clean out the pole shed and insulate part of it for a new shop and then build another storage building. The problem with this last idea is I would like to have in-floor heat and a floor drain and do not want to break up the concrete. Another issue that I need to think about is that the plan is to build a new house at another location in the next ten years and I could build my dream shop at that time. What would you do?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Oliver 70 Row Crop - by Staff. The Oliver 70 was part of the "Fleetline Series" and was manufacturered from 1937 to 1948. The row-crop configuration could have either dual or single front wheels. The Oliver 70 was also offered in the standard, orchard and industrial configurations. The tractors were sold in Canada. An early advertisement states "Power when you want it - power when you need it - power to help put in crops when field conditions are right and time and help are limited. That's the power you'll find in an Oliv
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
