Posted by MULE. on November 12, 2014 at 10:53:16 from (50.203.48.163):
We have 4 flat old style 140# flat weights we took off a 3020 with 38" wheels. We want to use these on our 4020 with 30" wheels. As you know they will hit the lug nuts since the weights are 24" in diameter. But that is what we have and we need the weight on the 4020. So we thought if we buy 1 pair of "30 inch" 120#, wheel weights, that would provide a spacer to get us out beyond the lugs. That part works and the bolt holes in the weights match up, but the inside hole does not. The center in the 120#, part number R61727, is larger than the 140# weights. Any suggestion on making these work together. This is going to be a working tractor so what ever we do they need to be durable. This is my son's first tractor, I'm really trying to keep the cost down.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Oliver 70 Row Crop - by Staff. The Oliver 70 was part of the "Fleetline Series" and was manufacturered from 1937 to 1948. The row-crop configuration could have either dual or single front wheels. The Oliver 70 was also offered in the standard, orchard and industrial configurations. The tractors were sold in Canada. An early advertisement states "Power when you want it - power when you need it - power to help put in crops when field conditions are right and time and help are limited. That's the power you'll find in an Oliv
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
