Posted by Bryce Frazier on July 21, 2014 at 13:17:23 from (67.142.182.20):
Alright, so I got this wagon home and have been doing some work to it. The steering is finally starting to free up, and the more I pull it around the better it gets!
I have been trying to ID it, and I made a major break through yesterday. I found 4 holes on the back of the rear axle where there was clearly a plate at one time. I went back to my previous post about Farm Wagons, and many of you said that is where the tag would be if it was a David Bradly, made by Electric Wheel Co.
While looking at the post, I remembered the picture of the wagon that i posted that was for sale on CL (1st picture here) I looked at it and it is nearly the exact same wagon as the one I got home!!! (2nd picture here)
So, here is what I am seeing is wrong with mine... You will notice on the first wagon, that there is a cross bar ON TOP of the front axle that has the holders for 4 x 6's on it.
When you look at mine, my brackets are just welded to the axle? Mine doesn't have that big block on top of the front axle like the other one does?
When I stepped back and looked at the wagon, it looks like if I was to lay a 2 x 4 (or whatever) between the front axle and the rear axle, and then put a level on it, it looks like the 2 x 4 would be sloping down towards the front of the wagon, which is NOT going to work if I am going to put a flat bed on it for bales... What should I do?
Also, what tonnage of running gear do you think I have? 6 x 15 tires, 5 bolt rims. I am thinking probably 4 ton? 2000lbs per wheel? Bryce
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Sunday Drives - by Cowboy. Summer was finally upon us here in Northern Maine. We have two types of industry up here, one being "Forestry" (Wood Products) and the other "Farming" (Potatoes). There is no shortage of farm tractors and equipment around here! I have been restoring old Farm Tractors for the past 6 years, and have found it easier and less expensive to hit all the auctions and purchase whole tractors for parts needed. My wife who works at a local school, and only has weekends and summers off, while on t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
