Posted by NEBeef on June 13, 2014 at 06:50:37 from (198.51.119.151):
In Reply to: Buying a tedder posted by Super Steve on June 12, 2014 at 11:58:22:
Around here (middle New England) you would have a real hard time making good quality dry hay without a good tedder.
There certainly is some technique to using a tedder. You can be pretty aggressive when the hay is green - usually you're trying to spread the hay out right after cutting/conditioning. As the hay dries it needs to be tedded more gently, so the RPMs should go down and/or ground speed goes up.
To those who ask why not just let it dry? Well, (again around here) that might be several weeks, lol. There's simply not long enough weather windows to use that approach - if you can't bale it up within three high humidity days chances are you're going to lose it.
I find this regional difference quite interesting, I'm always watching the way folks make hay when I travel...
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers WD45 (Gas Version) - by Staff. Beginning production in 1953, the WD45 had the same general look as the WD tractor which was produced earlier - but was much more powerful. This was due to the new 4-cylinder "Power Crater" gasoline engine with a 4 x 4-1/2 inch bore and stroke. Some people feel this was one of the most significant tractors offered by Allis-Chalmers in those days. Nothing in its weight or power class could match its performance. In 1954 they began offering the WD45 with the new "Snap-Coupler&quo
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
