Re: Pioneer Fittings

Posted by Texasmark1 on June 09, 2013 at 06:16:55 from (162.72.24.133):

In Reply to: Pioneer Fittings posted by Organicfarmer1972 on June 08, 2013 at 14:08:29:

I shop TSC for hyd fittings. Last time in there I noticed two types
of male fittings; one with the ball end and the other with a pin
shaped end. Since this thread is on the subject I decided to
investigate.

Pioneer is a Parker brand. Parker is probably the biggest mfgr of
all kinds of hydraulic accessories and O rings among other
things. They are real big in industry. Used them all the time.

The difference in the two mating schemes is that the ball
bearing is the old style connector. Problem with that is that you
usually have to shut down your tractor and relieve the pressure
to get the fittings to mate.

The Pin shaped end is designed such that you can make
connection with pressures up to 3000# present.

Great. Now we both know and I should have purchased the pin
end the last time I bought connectors. As I recall the price is the
same.

HTH,
Mark

Replies:

• Re: Pioneer Fittings Tx Jim 06:36:32 06/09/13 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]