Posted by sixtyninegmc on May 04, 2013 at 20:00:33 from (216.67.21.14):
Anybody ever seen or setup themselves a truck to pull a NH stackwagon? Snow is still on the ground around here (not normal!), so some scheming is being done. Currently pulling the 4020 off the discbine to pull the stackwagon, which is a pain to change PTO shafts, and the biggest time killer with the pull type is the slow road speed. I`m thinking a medium duty truck can be had much cheaper than another tractor, and I get mirrors wide enough to help back the wagon up to the stack, and controls could be rigged fairly easy in the cab. Think run the PTO with a hydraulic motor, so the PTO shaft could be put back on and run it with a tractor if need be. How crazy am I? A self propelled is on the list, but this would make what I have work a lot better for the time being, my outlying leased fields would be a lot less headache.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Best Tractor? - by Staff. This recent discussion on the Tractor Talk discussion board here at the on-line magazine drew quite a bit of response. We see the question of "Which tractor is best for me?" asked quite often. We thought you might find the responses interesting. As always, the names of the people participating in the discussion have been left out - we did not request their permission to reprint their names in this article. However you can find this discussion in it's entirety in the Tractor Talk archives.
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
