Posted by notjustair on March 30, 2013 at 19:03:44 from (174.229.66.187):
I need a short auger - I'm thinking like seed auger size. I need it to get from the horizontal unloading auger at the bottom of the grain bin to the hopper on the mixer grinder. We are talking a couple of feet. If there wasn't a concrete slab I would just dig a little pit, but that isn't an option
Here are my issues: I don't want to buy a new one for something like this. I also can't find any short augers on CL - everything is either attached to the seed wagon or 70 feet long.
I'm thinking about going to the combine junkyard and buying the unloading auger or clean grain auger off a junker and putting a motor on it. What combines would have something that would work well? I sure don't want a 10 inch auger, so obviously from older machines. Are there any other options (other than a grain scoop!)?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Harvestin Hay: The Early Years (Part 2) - by Pat Browning. The summer of 1950 was the start of a new era in farming for our family. I was thirteen, and Kathy (my oldest sister) was seven. At this age, I believed tractor farming was the only way, hot stuff -- and given a chance I probably would have used the tractor, Dad's first, a 1936 Model "A" John Deere, to go bring in the cows! And I think Dad was ready for some automation too. And so it was that we acquired a good, used J. I. Case, wire tie hay baler. In addition to a person to drive th
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
