Posted by Erik Ks farmer on March 26, 2013 at 08:59:24 from (199.241.240.16):
In Reply to: Calving pics. posted by casecollectorsc on March 26, 2013 at 07:18:31:
I have plenty of feed, I hay quite a bit and normally sell a fair amount of hay. I did sell around 50 tons which is about a 1/3 of normal. Hay is a scarce commodity around here right now. A lot of guys chopped silage last fall since the yield potential was around 10 bpa, most have had good luck feeding it but from my understanding it is about fed out. I am in East central Kansas at Overbrook. Jay what you see in the pics is where I bed them, it is the high point in a 6 acre lot and drains well. I feed in rings and this time of year is gets pretty rutted up and difficult to feed, I try to pile the mess and keep myself on solid clay. I feed with a 180 MF with a front loader and 3 pt forks, it is a pig in the mud. I have to keep a bale on the 3pt to maneuver in the lots.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.