Posted by Banditfarmer on November 20, 2012 at 16:24:56 from (174.103.143.47):
I have been looking (for a long time) for an Oliver 565 4 bottom simi mount and Saturday I found one. The price was $50 and I had to have it. Went and got it this morning greased it took a DA to the mold boards gave them a primer coat and to the field we went. The plow hadent been used in 20 years so I was praying they would shine without alot of problems. Made the head land and one more round and adjusted the deepth and a turn on the 3pt arm and it was about perfect! I wont win any awards for the plowing but it didnt look to bad. Everybody tells me that a 1550D wont pull a 4 bottom but it dose! Was running 4th gear low side about 1600 rpms and 7to 8inchs deep turning corn stocks under. This ground hadent been plowed in 10 years and it was hard and I do mean hard! It didnt take long to shine the bottoms so the longer I went the easer it pulled. The smell of fresh turned dirt alittle diesel smoke and the smell of corn fodder... Life is good! Good thing I have more to go! Bandit
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fabricating Sidesheets - by Chris Pratt. The easiest and best first-time project for wanna-be sheet-metal workers like myself is flat or nearly flat metal cut and drilled to be a tractor's sidesheet. A sidesheet is sheetmetal to cover either the engine as in the case of early Oliver's, Massey-Harris' and many crawlers or the wiring and electrical components as in the case of the Massey-Harris Pony, Allis Chalmers' D Series (D-14, D-15, D-12, D-10, D-17, and D-19). The need for fabricating becomes obvious when you go to buy any of these
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
