For once I have to agree with 36 Coupe. The blade needs serious attention. If you'll check this link you'll get an idea of what it's supposed to look like- http://www.crosscutsaw.com/16.html That's a different style of tooth than you'll get if that one is gummed (gullets re ground) but you get the idea. That's why it doesn't want to cut. The belt needs attention too. Round baler lacing will work but flat belt lacing is better. Removing the grease from the belt will help, but you need to secure the rig to the ground with a short belt like that. With a longer belt there's more weight and you can add a half or full twist to help it run straight.
As for the "accident waiting to happen", this is the same thing I hear every time a buzz saw gets mentioned. Honestly, if you ever actually spent some time running one you'd see it's really no more dangerous, maybe less so, than a chainsaw. How people allegedly lose legs, fingers. etc. is simply due to carelessness.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - What Oil Should I Use? - by Francis Robinson. I keep seein this question pop up over and over again in discussion groups all over the web. As with many things there are often several right answers and a few wrong ones. Some purist I'm sure will disagree to no end with what I will tell you but most of us out here in the real world don't really care do we ? Some of them only bring their noses down out of the air long enough to look down them anyway. If you are like me you are only doing this old tractor stuff because you enjoy it. You
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
