Posted by old on July 13, 2012 at 12:20:07 from (209.86.226.57):
In Reply to: Oliver vs Fordson posted by Finnbair2020 on July 13, 2012 at 11:28:51:
Well since you asked a similar question down a bit here is what I found out over the years of baling hay. As I said down there I have an Oliver 77 that I tried to bale with. I also have a Ford 841. The Oliver 77 is around 38HP the Fordson Major is around 38HP and the Ford 841 around 45HP as per the Neb test list. I found that hand down no matter what or where the Oliver 77 will pull circle around my 841 and my 841 I also know has a newer engine then the Oliver does I.E. engine was rebuilt on the ford in the mid 80s the Oliver been a lot longer ago then that
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Buying your first tractor: The People You Buy From - by Chris Pratt. If you are a first-time buyer, chances are that you are likely to take the word of the seller on things. This is where the problems start... You have reviewed your implement needs and determined the size of machine that will fit the bill and even made a list of the most desirable models. You checked on the availability of a 3-point hitch for the machines on the list and advertised in your local classified paper with so
... [Read Article]
Latest Ad:
1 SD Gibson, 1 D Model needs rear end assembled and installed, 1 D Model needs minor repairs, extra parts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
