Re: out-of-position welding - Puddles?

Posted by The tractor vet on July 03, 2012 at 08:27:25 from (76.212.225.132):

In Reply to: out-of-position welding - Puddles? posted by McNugget on July 03, 2012 at 06:47:05:

Yep turn down the heat , Vert. up and for starting out 6011 will work . The whip and pause where ya weld on one side for a second or so then whip over to the other side for a second or so , thats a bit of learning and a stead hand helps. Don't worry somuch about the middle as it will take care of it's self. Hold rod straight in to about 10 degrees up . Practice on some scrap and i'll bet with in a dozen rods you'll be doing just fine.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]