Posted by gun guru on April 20, 2012 at 15:47:40 from (75.128.139.102):
In Reply to: O/T:Building a house posted by c-man on April 20, 2012 at 14:19:58:
It comes down to how much money do you have? Can you pay cash for the material, or at least most of it? That is how you know. When I built my home in 1999 I was able to get the foundation, framing, roof, windows and almost all the mechanical in with my own money. Then I had to get a loan to buy all the finish stuff, like drywall, all plumbing fixtures, cabinets, paint, all electrical. One very important thing to know is that it comes down to dollars per sq. foot. If you do all the finish work yourself it will be about $60 per sq. foot. Completely done by a builder will be about $100 per sq. foot. It sounds like you dont have kids living with you, you can build a smaller home then.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.