Posted by LJD on November 12, 2011 at 18:02:36 from (67.142.130.44):
In Reply to: Re: Tire Pressure posted by jose bagge on November 12, 2011 at 16:11:12:
Two anecdotal observations. No science or theory involved. Just what happens in real life with my tires.
One - my 92 Dodge W250. The guy I got it from ran the 235/85-16" tires at 80 PSI all the time. The centers on all four were bald and the tread near the sideways barely worn at all. To me that's ample proof that with these radial tires, over-inflation certainly made a negative difference. I still have them laying in my dump and will gladly post photos of these four tires with center bald areas if anyone wants to see.
Two - my 1983 Blazer K5 plow truck with 235/75-15" radials. I live on the steepest mountain road in town. Dirt and ice and snow covered most of the winter and it never gets salted. When I run my tires at 25 PSI I get substantially better traction then when at 44 PSI (max rating). Especially on shear ice. I soften the tires every winter due to that fact, since in bad weather it is a plow truck only and never used for long trips.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Machine Shops - by Curtis Von Fange. It is a story that repeats itself countless times. In the process of rebuilding a particular section of the tractor there is a broken part for which a replacement cannot be found. The parts houses find in their catalogue that it is unavailable. The dealerships call it a discontinued part. Salvage yards define it as hard to find or, even worse, rare. Everyone on the NET says, 'what is it?' But don�t despair there is another avenue that can be used to get that piece repaired. The local mach
... [Read Article]
Latest Ad:
1 SD Gibson, 1 D Model needs rear end assembled and installed, 1 D Model needs minor repairs, extra parts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
