Sounds like you have plenty of hp to farm with. You might want a small 4X4 tractor and loader, box blade tiller etc. to mow and mess around with. We have a 4320 Compact 1 and a half yrs old and 300 hrs. use it the most. It will pull a 7000 no-till planter. We also have a 10ft Great Plains no-till drill. It takes a 4040 JD to pull it. I spray with a 6060 AC with GPS. The light bars are super cheap now. Also a WD45 with loader to run the auger. O and the most valuable a 480E Case backhoe. Don't know how we ever got along without it. We just have 15 ft disk and a 15 ft do-all. Do no deep tillage. mostly no-till. Use the 4040 to knife in Nitrogen, 3 shanks on 60in centers. It is just a 4020 with a cab. O the combine. We have a L2 Gleaner, the reason is there is quite a few around us, and most have a donor combine, we all share parts. I would just go with the flow, and let it evolve.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let�s make one more addition to our series on hydraulics. I�ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
