Posted by PJH on August 09, 2011 at 08:43:25 from (50.40.161.78):
In Reply to: Hay making Screw-UP!!! posted by Gilbert in IL. on August 08, 2011 at 20:52:19:
I'd for sure pay the man for his work, even if it wasn't what I wanted.
Years ago, when round bales were first coming into play, we moved them one at a time with a homemade sled and a B John Deere. For feeding, we had them arranged to move an electric wire and the rings to allow access to a couple of bales at a time. I admit that you ain't gonna be able to deal with them in the dead of winter, with the equipment that you now have, but maybe with a little thought and planning you can overcome this problem.
Our sled was made out of 3/4" plywood and reinforced with 2X6's on the edges. We rolled them on and off the sled with a bumper on the front of the old B. We thought we'd hit the big time, feeding those round bales just like the real farmers. . .
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Maintaining Rubber Tires - by Staff. The broad use of rubber tires on farm tractors and machinery has resulted in a great saving in both time and operating costs since the time of steel wheels. There are, however, certain basic fundamentals in the care of tires that should be followed carefully if the owner is to derive maximum benefit from his or her investment. First and most important is to maintain proper pressure for the work at hand. Your best guide to proper inflation is the operator's manual or instruction book tha
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
