Ford 9N, 2N and 8N Discussion Board |
Re: 3-point Scoop...what features?
[ View Follow Ups ] [ Post Followup ] [ Return to Ford 9N, 2N and 8N Discussion Board ]
Posted by JamesC on March 13, 2000 at 08:36:18 from (206.97.171.220):
In Reply to: 3-point Scoop...what features? posted by Steve Warfle on March 13, 2000 at 05:32:31:
I have a Massey scoop. It's about 30 inches wide. In the last few weeks I moved about 15 yards of dirt with it. I took some time but sure beats a shovel and wheelborrow. Once you get your cordination in place, it will go fairly fast. I backed up to the pile as fast as I could to load the scoop. It my clay dirt, it's hard to fill the back of the scoop so a wider one would be better for me. Once I unloaded it, I would bump the scoop on the ground to latch it. The release rope is a problem. I got nervous with this rope on my lap, what if it got cought on the pto or elsewhere so I tied it to the fender yesterday. I'm considering adding a release lever on the tractor for it since its hard to pull or add a pulley like mentioned in the other response. I think a scoop and box blade are my 2 favorite tools. I really does not matter how long it takes to move the dirt, It's the joy of being on the tractor that counts.
Follow Ups:
Home
| Forums
Today's Featured Article -
Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|