|
Farmall & IHC Tractors Discussion Board |
Feather story
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Sam on December 22, 2000 at 08:41:25 from (129.82.219.17):
Last weekend I tore the 560D fuel tank off (again) to clean it. This is the third time - you would think I'd learn. This is a tractor that sat outside for 11-12 years without being started, and at least a few years with no fuel cap. We had the tank pressure washed and seemed to have it in pretty good shape. However, a few running hours later I noticed some feathers in the sediment bowl, and soon had to drain the tank because the valve above the sediment bowl was plugged. We'll just forget the part about how I cleaned the tank and bowl, and reassembled everything, filled the tank, and then discovered I hadn't remembered to clean the valve (took it off one night, put it back on the next day - must have a short memory). Anyway, I attributed the feathers to a dirty fuel can. I got religion about clean fuel cans, and have been filtering as I pour into the tank. So when the feathers showed up again it was time to re-examine the tank. A baffle in there makes it a bit difficult, but with a bit of work I was able to see a beak poking out from underneath it. A bunch of fishing later, I had removed the head, and then the body, and also an old rag. With everything reassembled and the rewiring job semicompleted I tried starting it. No joy (no sign of exhaust as it cranked). I disconnected nozzles, and towed it around the yard. After a lot of towing I got diesel at each nozzle, but it sure seemed like a lot of work. Still no joy in getting it started, and it was time to do chores. Just now I was reading a page back on the hard starting red tractors and saw some comments about diesel gelling in cold weather. The tractor is in an unheated shop, and it has been down below zero several times - I guess it is time to inspect the filters. If it was gelled, have I made life worse by towing it?
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Tractor Proflie: Farmall Model C - by Staff. In 1948 the first Farmall Model C tractor rolled out of the factory and into the farmer's field. A follow-on to the Model B, it was slihtly larger in size but kept the same 113 CID engine and 4-speed transmission. Other upgrades included adjustable rear tire spacing (with sliding hubs), a frame design similar t
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|