Posted by The tractor vet on March 11, 2014 at 13:02:39 from (75.19.125.103):
In Reply to: Re: 826 Park Lock posted by pete on March 11, 2014 at 11:21:15:
Well i can do it by myself but i lot count a long time ago on how many range covers i have had off . Not only do you have to pull the top cover but also the side cover on the left side behind the step , there is a shift rod that goes down to the rev. shifting fork and when you pull the cover the rev. shift rod comes up and rev. shift fork falls over . also i do not know IF your park loc. has been updated or not . If it is the old style it is and over center deal and not much of a hassle , but if it has been changed to the new Spring loaded park loc then it is a big deal . Then you have to block the park loc up in the disengaged position with a 1/2 inch nut to hold it UP and one must be careful or it will EAT YOU . You say that the park loc will not come off ?? if this has been changed to the new style and moving the handle does nothing the pin on the rod may have sherd and let the fun begin . The way to tell if you have the old verses new , OLd style has and adjustable rod from the lever to the linkage on the up and down rod . New style spring loaded does not and just a solid rod with two 90 degree bends . When you remove the side cover to get to the rev. shift fork IF the hyd level is at the correct level and NOT FIVE OVER you will loose about a gallon of hyd. oil when you pull the cover If it is over full then you can loose six or more . For a first timer it is nice to have one extra pair of hands.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Show Coverage: Godfrey, Illinois Country Days - by Cindy Ladage. Except for last fourth of July's Old Gold show in Springfield, Illinois, I don't remember when it was so hot. Nevertheless, the heat didn't keep vendors and visitors alike from enjoying the third annual Country Day's Event. Jane Elliott said the event was originally a one man show. "Barry Seiler, owner of Country Town Farm Supply store used to invite people up to the Johne Deere store. He would give hats and a free meal for everyone that brings a tractor." Elliott said while this
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.