Re: S-C Farmall Clutch

Posted by Larry Ks on August 28, 2000 at 08:34:42 from (205.171.70.164):

In Reply to: S-C Farmall Clutch posted by Larry on August 26, 2000 at 17:46:18:

I may be off base here, but I'm wondering if your throw out bearning is simply worn out, and not pushing the fingers on the pressure plate in far enough to let the clutch release. I'm not certain, but my SC had a kind of fiberous throw out bearing, when i had it apart and looked at it, I was amazed that it worked at all. I'd take REDS suggestion and work on the adjustment, might be such a thing as putting more travel into the linkage would make it release. If you have to go further, they make a new style throw out bearing that uses a metal bearing. You'll have to buy the bearing and the holder (about $120) if my memory is right, but it sure looks like a much better deal. Good luck.

Follow Ups:

• Re: Re: S-C Farmall Clutch Larry 18:21:23 08/28/00 (1)
  • Re: Re: Re: S-C Farmall Clutch Larry Ks. 22:24:10 08/28/00 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: S-C Farmall Clutch Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]