Re: Driving V-belt with an H's PTO

Posted by Dave in CT on September 27, 2009 at 13:51:42 from (69.177.251.53):

In Reply to: Driving V-belt with an H's PTO posted by Dave in CT on September 27, 2009 at 13:16:56:

Thanks Janicholson and Fawteen (all I've read so far). I was expecting to use the positioning of the 3-pt to establish the belt tension and the size of the pulley driven by the PTO to determine the RPM. I may be able to replace the shaft of the shredder with one that is longer and thus allow for a long drive shaft off the PTO but I'd rather find a method to drive a belt. Those "mule drives" look like an interesting solution. Thanks for the diagram. Anywhere there's a picture of the same thing?

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]