Posted by Andrew Z on April 16, 2009 at 08:56:09 from (64.252.181.197):
In Reply to: Char-Lynn PS Super M posted by Chris NW Ind on April 16, 2009 at 08:45:56:
First thing i would say is that at a stand still they are not going to be really smooth, not sure how hard it is to turn yours. On the Super MD it will turn the wheels not moving but it has to be at least 800rpms to build pressure. Your system maybe air locked too perhaps. What i did one time on a M that the power steering lost all the fluid and drained out over the winter. I jacked the front of the tractor up just enough to get the weight off the front wheels. Started the tractor gave it about 1/2 throttle and turned the wheel back and forth from the stops about dozen times, put it back on the ground and it was fine, no more troubles. Give that a try easy thing to start with anyway.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - History of the Nuffield Tractor - by Anthony West. The Nuffield tractor story started in early 1945. The British government still reeling from the effects of the war on the economy, approached the Nuffield organization to see if they would design and build an "ALL NEW" British built wheeled tractor, suitable for both British and world farming.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
