Posted by JimB2 on November 29, 2008 at 12:34:13 from (99.241.179.24):
In Reply to: Re: IH 454 Hydro posted by hvander on November 29, 2008 at 12:18:55:
Hi Henry, the lever I should not say it is on the dash but the one that you pull up to START and push down to STOP the tractor. The START position is about 1/4 the way towards the RUN position of all the way to the top. Look on the side of the injection pump and there is a cylinder mounted with a plunger coming out of it. The START position is where the plunger is fully extended with the STOP/RUN lever still touching the plunger. This acts like a choke on a gas engine. So in colder weather put the STOP/START/RUN lever in the START position and crank the engine, when it starts let it run 15 to 30 secs in the START position then pull it up to the RUN position.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Major Problems - by Anthony West. Following the aquisition of the two Fordsons to my collection I found that I was struggling to move them about. I had considered the possibility of driving the "F" to and from shows but anything other than local rallies was totaly impractical due to its sedate pace. I had also considered buying a landrover and trailer, but the price of a
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
