|
Farmall & IHC Tractors Discussion Board |
806 Power Steering
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall & IHC Tractors Discussion Board ]
Posted by Ken T on March 13, 2000 at 15:03:29 from (209.83.76.66):
I wonder if someone could give me their best guess as to the cause of this problem. When my 806 sits for more that a couple of days, there is no steering at first startup. By this I mean that, with the engine running, I can turn the steering wheel several turns and it is as if it is not connected to the wheels in any way. The steering wheel turns easily and does not turn the front wheels. After turning the steering wheel for a couple of turns, the power steering comes to life and the front wheels begin to turn as normal. The tractor will then operate normally from that point on. This problem must be caused by one of two things. I suspect the manual pump that is directly connected to the steering wheel, or the control valve that directs pressurized hydraulic oil to the steering piston based on input from the manual pump on the steering wheel. Actually there could be another cause for this. Possilby the multiple control valve is not holding hydraulic fluid in the system after shut down. Does anyone have a thought on this? Note: I can live with this the way it is indefinitely. It is just kind of a nuicance and I like to have everything working as it should.
Follow Ups:
Home
| Forums
Today's Featured Article -
What Oil Should I Use? - by Francis Robinson. I keep seein this question pop up over and over again in discussion groups all over the web. As with many things there are often several right answers and a few wrong ones. Some purist I'm sure will disagree to no end with what I will tell you but most of us out here in the real world don't really care do we ? Some of them only bring their noses down out of the air long enough to look down them anyway. If you are like me you are only doing this old tractor stuff because you enjoy it. You
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
