Posted by dansuper27 on February 27, 2008 at 09:18:10 from (12.189.93.130):
I hate the way the after market 3 points look and wanted something factory looking for my M. I looked at how Farmall put the Fast hitch on the tractors and it's nothing more than casting 3 mounting points on each side of the back of the tractor so I went to the boneyard and measured some hitches. Turns out there is one that is a perfect match if you have a mounting point. I made the mounting brackets and lower arms. The lower arms were copied from my 806. This hitch gives you down pressure also and all my hydraulics work off the belly pump. I have 1 control for the hitch and 1 for a remote. Works great. I have to make a better looking draw bar mount and add the turn buckles for the sway control but I have had this on the tractor for 3 years now and it has worked perfect. This tractor does all my light planting and cultivating Best machine ever built. Everything on it is rebuildable and most parts can still be got at your local case dealer Here are some pics with one of the bean cutters I'm working on for it. This tractor is almost at the point for getting a complete paint job. Just a few more things need looked at first.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Best Tractor? - by Staff. This recent discussion on the Tractor Talk discussion board here at the on-line magazine drew quite a bit of response. We see the question of "Which tractor is best for me?" asked quite often. We thought you might find the responses interesting. As always, the names of the people participating in the discussion have been left out - we did not request their permission to reprint their names in this article. However you can find this discussion in it's entirety in the Tractor Talk archives.
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
