|
Farmall & IHC Tractors Discussion Board |
year of M and about 400
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall & IHC Tractors Discussion Board ]
Posted by Roger on February 15, 2000 at 17:38:15 from (209.2.248.17):
I bought an M this summer and the tractor sn. plate is missing but the no. on the engine is FBKM 66094. If eng. serial numbers are close to the tractor no. this looks to me to be a 1943. Also a casting date on the housing ahead of the brake pedals is 12-9-M and another on the top of the transmission cover is 12-1-M. Will these help tell the year? Now, my 400 is sn.36691 S. Im wondering if the S has any signifiance and if so, what. Also I see that the begining serial no. in '56, the last year they were made, starts with 29065. Does that make this quite late one or were there a lot more built after this one? I have also heard that some of the real late 400s had the bigger 450 eng. Any truth to this? Thank you for your attention. Roger
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Measuring with Calipers - by Staff. The legs of inside calipers are curved outward at the extremities to facilitate measuring small holes, while outside caliper legs have a large curve inward to increase their capacity for large work. Firm-joint calipers are adjusted approximately by the hands and then set to the feel of the work by tapping them on a metal surface. It is a common practice when opening calipers by this means to tap the top of the joint. It is better, if possible, to tap the inside of the legs, as repeated blo
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|