Posted by Chris Hibbert on August 16, 2007 at 18:49:42 from (24.106.231.115):
On my IH 424, when I first got it, if I went to apply the brakes, the left one would grab immediately and by grabbing I mean lock up immediately - no slow down - just lock up. Someone on here had recommended to someone else to take it on flat ground and put it in gear and force it to overpower the brakes - I did this and it smooths out for that time of use but the next time I go to use it (several days later) it will bind up again. I took the brake cover/housing off and blew out some dirt and bees nests but overall from what I saw, things looked ok. And in case you might think it's adjustment, I have about 1.75" of pedal travel before the brake grabs. Can anyone recommend anything for me to try?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Generators - by Chris Pratt. As a companion to the articles on three-brush and two-brush generators, it seemed fitting that we should provide our readers with a description of how a generator works in lay terms. The difficulty with all those "theory of operation" texts is that they border on principles of electricity or physics and such. Since I know nothing of either, you will have to put up with looking at the common sense side of how generators work which means we "
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
